8-Channel Strain gage Simulator Board

• 8 Simulated strain gages
• Configured as Full, Half or Quarter bridge
• 120, 350 and 1k Ohm standard configurations
• AC or DC excitation
• >250 kHz bandwidth
• Wide ±15 V excitation range
• On-board A/D converter monitors excitation voltage

12-Channel Electromechanical Relay Output Layer

• For use in DNA series Cubes
• 12 independent Form C (SPDT) relays
• 150 VAC contact ratings
• 200 mOhm resistance (not including cabling)
• 2 Amp @ 30 VDC, (continuous)
• 750 mA @ 120 VAC (continuous)
• 125 Hz switching rates
• Available with output current/voltage readback (see DIO-462)

Guardian™ 12-Channel Form C Relay Output Board

• The Guardian Advantage
  • Programmable overcurrent protection (50 mA to 2 A)
  • Programmable overcurrent duration limits
  • Monitors each channel’s output voltage and current allowing Automatic detection of shorts/open and other system failures
• 2 A continuous output current at 30 VDC
• 1750 mA continuous output current at 150 VAC
• 200 milliohm on resistance
• Output throughput rate of 125 updates per second

5-layer enclosure; room for 3 I/O layers; CPU + GigE/1000Base-T NIC; PowerPC 400 Mhz CPU; 24V (100 W) power supply, and FAN option

• Slots for 3 I/O boards
• Over 30 different I/O boards available
• Two independent Gigabit (1000/100/10Base-T) Ethernet Interfaces One port for Control, the second for diagnostics
• Two USB 2.0 ports (one controller & one slave)
• Inter-Cube sync interface
• Rugged: 50 g shock, 3 g Vibration, -40 to +70°C, 0 - 16,000 feet
• Compact: 4" x 4.1" x 4"
• Real-time: 1000 I/O scans in < 1 millisecond
• Complete Windows, Linux and RT OS support
• LabVIEW™, MATLAB®, DASYLab&trade, Simulink® support and more
• Standalone deployment as UEIPAC, UEISim or UEIModbus

8-layer enclosure; room for 6 I/O layers; CPU + GigE/1000Base-T NIC; PowerPC 400 Mhz CPU; 24V (100 W) power supply, and FAN option

• Slots for 6 I/O boards
• Over 30 different I/O boards available
• Two independent Gigabit (1000/100/10Base-T) Ethernet Interfaces One port for Control, the second for diagnostics
• Two USB 2.0 ports (one controller & one slave)
• Inter-Cube sync interface
• Rugged: 50 g shock, 3 g Vibration, -40 to +70°C, 0 - 16,000 feet
• Compact: 4" x 4.1" x 5.8"
• Real-time: 1000 I/O scans in < 1 millisecond
• Complete Windows, Linux and RT OS support
• LabVIEW™, MATLAB®, DASYLab&trade, Simulink® support and more
• Standalone deployment as UEIPAC, UEISim or UEIModbus

48-Channel SOE Recorder Interface

• 250 µS time stamp resolution
• 0 - 140 VDC input transition levels
• Programmable hysteresis
• 350 VAC isolation
• Expandible from 1 channel to over 5000
• Includes DNR/DNA board, cable and screw terminal panel
• Fully compatible with all other DNA/DNR series I/O

8-Channel Strain gage Simulator Board For PowerDNR RACKtangle.

• 8 Simulated strain gages
• Full, Half or Quarter bridge software selectable configurations
• 120, 350 and 1k Ohm standard configurations
• AC or DC excitation
• >250 kHz bandwidth
• Wide ±15 V excitation range
• On-board A/D converter monitors excitation voltage

12-Channel Electromechanical Relay Output Layer

• For use in DNR series RACKtangle chassis
• 12 independent Form C (SPDT) relays
• 150 VAC contact ratings
• 200 mOhm resistance (not including cabling)
• 2 Amp @ 30 VDC, (continuous)
• 750 mA @ 120 VAC (continuous)
• 125 Hz switching rates
• Available with output current/voltage readback (see DIO-462)

Guardian™ 12-Channel Form C Relay Output Board

• The Guardian Advantage
  • Programmable overcurrent protection (50 mA to 2 A)
  • Programmable overcurrent duration limits
  • Monitors each channel’s output voltage and current allowing Automatic detection of shorts/open and other system failures
• 2 A continuous output current at 30 VDC
• 1750 mA continuous output current at 150 VAC
• 200 milliohm on resistance
• Output throughput rate of 125 updates per second